JKTECH Solder Dross Recovery Machine SD09F Featured Image

Umatshini wokuBuyisa iDross ye-JKTECH SD09F

Inkcazelo emfutshane:

Mumfanekiso:SD09F

Oku kufana nokunciphisa ukusetyenziswa kwe-solder ukuya kwi-50% kwixabiso elifanayo lemveliso, izinga lokuhlukana kwe-alloys lifikelela kwi-98%, uyilo lwezoqoqosho kunye neenyawo ezincinci kunye nokulula ukuthutha; ukusebenza ngaphandle kwe-intanethi ngaphandle kothuli, i-reation ephezulu yokubuyisela, umthamo ophakathi.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Uphawu :

∎ Kukwahlula ngokwasemzimbeni ngaphandle kokusebenzisa nayiphi na imichiza.

∎ Ireyithi yokwahlula ingxube yenkcenkce ifikelela kuma-98%.

■ Ibha ye-solder ephinda isetyenziswe inokusetyenziswa ngokuthe ngqo kwi-wave soldering.

■ I-Compact ngobukhulu, yonke insimbi engenasici kwaye kulula ukuyigcina.

■ Isixokelelwano esinelungelo elilodwa lomenzi wokuxutywa kunye nokwahlula ukuze kuphuculwe ukusebenza kakuhle kokwahlula.

■ Imbiza yesoda yenziwe nge-corrosion resisting ss 316L imathiriyeli enobomi obude benkonzo.

■ Iyunithi isebenzisa isifudumezi esimilo “U” esigqunywe ngentsimbi yokufudumeza ipleyiti, nto leyo eya kuthintela ukonakala.

■ Umlawuli weqondo lokushisa we-OMRON kunye ne-SSR relay iqinisekisa ulawulo oluchanekileyo lokushisa kunye nobomi benkonzo ende.

■ Umatshini uya kwenza i-alamu xa i-solder eyahluliweyo ikwi-cabin kwaye ifikelela kwivolumu epheleleyo, oku kubonisa ukukhupha i-solder.

■ Umatshini uxhotyiswe ngeeseti ezi-2 zetreyi yokubumba, ezilungele ukwenza imivalo ye-solder.

■ Ukubuyisela umthamo malunga ne-6KG/Hr, inokufakwa ngaphakathi kumatshini wokuthengisela amaza njengomatshini ongaphakathi.

■ Uthuthu lwetin oxide olwahluliweyo luya kuqokelelwa kwibhokisi eyahlukileyo, ukuze lulahlwe lula.

■ Ixesha lokuhlawula i-asethi <6 iinyanga.

■ I-CE ingokuzikhethela kwaye iyafumaneka.

■ iminyaka eli-13 ye-R&D kunye neentengiso kwi-WW.

Iinkcukacha :

Ukuba unomdla kwiimveliso zethu, nceda uthumele i-imeyile ku-Sales@jinke-tech.com

Umzekelo	SD800	SD10MS	SD09F
Ukunikezwa Amandla	3P 4￠ 380V @50HZ	1 isigaba 220v @ 50HZ	1 isigaba 220v @ 50HZ
Amandla aQhagamshelweyo	5.8KW	4.5KW	2KW
Amandla okuBaleka aqhelekileyo	1.8KW	1.5KW	1.0KW
Umthamo weTin ongezantsi weNdawo yokuxuba	100Kg	70Kg	10Kg
Ixesha lokufudumeza	60mins	60mins	50mins
Inkqubo yokulawula	HMI+PID	PID + Amaqhosha	PID + Amaqhosha
Buyisela uMmandla	30Kg/Hr.	15Kg/Hr.	6Kg/Hr.
I-Solder Bar yokubumba iTreyi	Ukuzenzela okuzenzekelayo	2 EA	2 EA
Ubunzima Net malunga.	500Kg	110Kg	45Kg
Ubungakanani (LxWxH mm)	1800x1050x1600	680 x 850 x1050	500x250x650 140x330x390