Iimveliso

  • Ibhokisi ye-UV ye-LED yokunyanga umatshini we-Degumming

    Ibhokisi ye-UV ye-LED yokunyanga umatshini we-Degumming

    Le bhokisi yokunyanga ye-UVLED ixhotyiswe ngeqela eli-1 le-365nm wave band, amandla okukhanya yi-250mw / cm2, kwaye indawo yokukhanya yi-350X350mm yomthombo wokukhanya opholileyo we-UVLED womoya, kunye nemitha ye-ultraviolet Ukukhanya okuphezulu kokukhanya, ukufana kwendawo efanelekileyo, njl. Ubungakanani bemveliso ekhethekileyo Amanqaku, ukusebenza okulula, inkqubo yokulawula i-PLC ehlakaniphile kunye nemodyuli ye-chip ye-LED ephezulu yamandla inika isiqinisekiso sokunyanga okuphezulu kokunyanga kunye nokuzinza komgangatho, kwaye inokuhlangabezana nokusetyenziswa ngokugqibeleleyo ngabathengi kwiinkalo ezininzi.Ukuthembeka, ukuzinza kunye namaxesha amafutshane okuphilisa zizibonakaliso ezibalulekileyo

  • Imela esezantsi ethe ngqo, i-JK-29-4

    Imela esezantsi ethe ngqo, i-JK-29-4

    I-blade ye-splitter isetyenziselwa ukusika kunye nokusika amashishini ahlukeneyo e-elektroniki.Yenziwe ngentsimbi yentsimbi ekhutshiweyo nebunjiweyo evela kumazwe angaphandle nasekhaya.ehlala njalo njl.Kukulungele ukusika iimveliso ze-elektroniki ezifana neebhodi zeesekethe ezahlukeneyo, i-aluminium substrates, iibhodi zeesekethe, i-V-Cut substrate splitters, njl.

     

  • Round imela Model JK-100

    Round imela Model JK-100

    I-blade ejikelezayo ye-splitter yebhodi isetyenziselwa ukusika kunye nokusika amashishini ahlukeneyo e-elektroniki.Yenziwe ngezinto ezibunjiweyo kunye nezakhiweyo ezivela kumazwe angaphandle kunye nezasekhaya ezixhathisa izixhobo zentsimbi.I-blade ayigugi, idigri ye-deformation incinci icocekile, ihlala ixesha elide, njl njl. Ilungele ukusika iimveliso zombane ezifana neebhodi zeesekethe ezahlukeneyo, i-aluminium substrates, iibhodi zesekethe, i-V-Cut substrate splitters, njl.

  • IModeli ye-oven yokuNyanga iConvection:BF460-5

    IModeli ye-oven yokuNyanga iConvection:BF460-5

    Iimveliso emva kwenkqubo ye-gluing egcinwe kwiphephancwadi eliqhelekileyo le-SMT, kwaye iphephancwadi lonke linyangelwe kwi-oven ngokuxabana nge-convection air hot.Ukuhamba kweHotair ngaphezulu kweemveliso ngokuthe tye.

  • Isibane se-Ultraviolet Isibane se-UV Uxinzelelo oluphezulu lwemercury Isibane seMetal halide isibane Isibane se-UV esingena-ozone

    Isibane se-Ultraviolet Isibane se-UV Uxinzelelo oluphezulu lwemercury Isibane seMetal halide isibane Isibane se-UV esingena-ozone

    Intshayelelo yesicelo:

    1) Isetyenziselwa ukunyanga iintlobo ngeentlobo zee-ink ze-UV photosensitive, ipeyinti ye-UV photosensitive, kunye ne-UV photosensitive adhesives;

    2) Isetyenziswa ngokubambisana nenkqubo yokunyanga eyenziwa yinkampani yethu.

  • Ibhanti yokuhambisa yeTeflon TEFLON Ibhanti yemesh yeTeflon yentsimbi engenastainless.

    Ibhanti yokuhambisa yeTeflon TEFLON Ibhanti yemesh yeTeflon yentsimbi engenastainless.

    Ukufakwa kwizixhobo ze-UV, isomisi se-infrared, uThutho lweNkqubo yokuThutha

  • I-Oveni yokunyanga ye-UV ye-Intanethi

    I-Oveni yokunyanga ye-UV ye-Intanethi

    Isithando somlilo se-UV esikwi-Intanethi se-UV sisetyenziselwa ikakhulu ukunyanga iglu kwimimandla yokugquma, ukubopha, ukulambisa kunye nokubulala iintsholongwane kwiimoto, ukhathalelo lwezonyango kunye nombane wabathengi.

  • Isibane semercury esikwi-intanethi ye-UV yokunyanga imodeli yomlilo: JK-UV302

    Isibane semercury esikwi-intanethi ye-UV yokunyanga imodeli yomlilo: JK-UV302

    1) Unokukhetha imodeli eqhelekileyo-yenjongo ngokubanzi ngokweemfuno zakho, kwaye unokwenza ngokwezifiso ukuba kuyimfuneko.Isixhobo samkela isakhiwo seprofayili esiqhelekileyo, esilungele ukusebenza kunye nokugcinwa kwakho, kunye nokusebenza okuzinzileyo, ukonga amandla kunye nokusebenza kakuhle.
    2) Lo matshini wamkela isibane se-mercury esine-high-pressure (isibane se-UV), kunye neyona ndawo iphakamileyo yokuphakama kwe-spectrum yi-365 nanometers.Ngokweemfuno zenkqubo, ithatha uyilo lokugxila okanye uyilo lokukhanya oluhambelanayo, ukuze izixhobo zikwazi ukuhlangabezana neemfuno zakho zenkqubo.
    3) Isibane esinye okanye idizayini yezibane ezininzi, inani lezibane linokulawulwa ngokukhululekileyo;isixhobo sokulawula isantya esichanekileyo, uluhlu lwesantya esibanzi, ukusebenza okuzinzileyo;ukupholisa umoya ngenkani ukuqinisekisa ubushushu obufanelekileyo bokusebenza.
    4) Izixhobo zethu ze-UV zinokufikelela "iiyure ezingama-24 zomsebenzi oqhubekayo".

  • Imodeli ye-V-Cutter yeDesktop: JK-F520

    Imodeli ye-V-Cutter yeDesktop: JK-F520

    Umatshini wokwahlula ibhodi ye-JK-F520 yohlobo lwemelayamkela uyilo lwemela ephezulu ejikelezayo kunye nemela esezantsi ethe tye.Xa usika ibhodi, i-v-cut ifakwe kwi-knife esezantsi ethe tye, ibhodi yesiphaluka ayishukumi, kwaye ummese ophezulu ojikelezayo uhamba ukusika ibhodi.Uxinzelelo luncinci, kwaye ibhodi Imowudi yebhodi yokusika ngaphandle kokuhambisa ummese inokuphinda igweme ngokufanelekileyo ama-bumps ngexesha lomsebenzi wokwahlula ibhodi yesiphaluka, ugweme umonakalo ofihliweyo, umonakalo wecandelo kunye nezinye iingxaki.Ilungele zonke iintlobo zeebhodi zeglasi zefiber, iibhodi ze-FR-4, iibhodi ze-FR-1, njl njl. Xa kuthethwa ngokuthelekisayo, ubunzima abukho bukhulu njenge-aluminium substrates.Kwiibhodi zePCB ezinamacandelo macala omabini, esi sixhobo sifanelekile ngokukodwa ukwahlukana kwebhodi.

  • Kwi-Intanethi ye-One-way ye-V-CUT Machine Model: JK-F550

    Kwi-Intanethi ye-One-way ye-V-CUT Machine Model: JK-F550

    - Umgca wendlela enye V-CUT Machine -

    I-F550 yindlela enye ye-intanethi ye-V-CUT, esetyenziswa kakhulu kwi-pcb kumatshini we-intanethi kunye ne-V-CUT slot yendlela enye, ngaphandle kokungenelela ngokuthe ngqo komntu kunye nokusindisa abasebenzi;Olu chungechunge lusetyenziswa ikakhulu kwi-low-stress depaneling ye-PCBA kunye ne-V-CUT yoyilo lwe-SMT ngasemva ukuze kuncitshiswe umonakalo obangelwa yinkqubo kwiindawo ezisecaleni.Uthotho lweemodeli zamkela ulawulo lwe-PLC, ulawulo lwekhompyuter yeshishini kunye nolawulo oluchanekileyo lweemoto, ukufikelela kulawulo oluchanekileyo lobungakanani benkqubo nganye yokuvelisa ephambili, kwaye inojongano olufanelekileyo lwe-HMI kunye nemisebenzi yesoftware etyebileyo, eququzelela kakhulu ukusetyenziswa kwabasebenzisi.Olu chungechunge lweemodeli lune-docking yokudlulisa ngokuzenzekelayo (SMEMA) umkhondo wokuvelisa umlambo, kwaye unokunqunyulwa ngomgca webhanti ye-ESD okanye ngeRobhothi ukufezekisa umphumo we-tray.

  • I-Automatic In-line ye-V-CUT Machine Model: JK-860R

    I-Automatic In-line ye-V-CUT Machine Model: JK-860R

    I-automatic inline V – CUT umatshini osetyenziselwa ukususa-iphaneli yePCBA ngoyilo lwendlela enye & nemigca enqamlezayo ye-V-score, emgceni ngokugqithisa umhambisi ophezulu, ukondla ngokuzenzekelayo ipaneli yePCBA;Irobhothi eyakhelwe-ngaphakathi ifunxa iphaneli yePCBA kwaye iyibeke kwindawo esezantsi;Emva kokuba iCCD iqinisekise ngokuzenzekela inqaku le-PCBA, inkqubo ilawula iblade engqukuva engaphezulu ejikelezayo ukuze ihambise ukususwa kweepaneli ngokuzenzekelayo;xa i-de-paneling igqityiwe, i-robot iya kuthabatha i-PCBA encinci efakwe iipaneli kwaye ibeke kwibhanti e-flat yokuphuma kwaye ibeke iithebhu zenkunkuma kumgqomo wokuqokelela ongezantsi.

     

  • Umatshini wokunyanga we-UV we-LED omncinci

    Umatshini wokunyanga we-UV we-LED omncinci

    Umzekelo: UV200INL

    Abahambisi bebhentshi-phezulu banebhanti eshukumayo enemesh edlula kwindawo yegumbi enezibane zokunyanga ezixhonywe ngasentla okanye ecaleni ukuze kunyangelwe izinto ezikhawulezayo, zinokuxhotyiswa iibhalbhu zentsimbi eziqhelekileyo (i-longwave) okanye izibane ze-LED, ngokwenkqubo yokuphuma kunye neglu ye-UV. iimfuno zokunyanga, zinokuqwalaselwa kunye nenye, ezimbini, okanye ezine UV okanye izibane zesikhukula se-LED, okanye ukuxuba iintlobo zezibane ukulungiselela usetyenziso olwahlukeneyo lokunyanga.

12Okulandelayo >>> Iphepha 1/2